PARAMEDIC CU-ERT AED Trainer

The Paramedic CU-ERT is a defibrillator simulator designed to mimic the operations of the Paramedic CU-ERT. It can simulate all the functions of the Paramedic CU-ERT including charging and shock delivery. It has preprogrammed rescue scenarios that were generated in accordance with the recommended rescue protocol of international rescue policy making bodies such as the American Heart Association, the European Resuscitation Council, and the American Red Cross. It is to be used in conjunction with the resuscitation mannequin from CU Medical Systems, Inc. It has a standard infrared remote control accessory which renders it operable by an instructor from a distance.

Intended Use

The Paramedic CU-ERT is intended for use during Advanced Cardiac Life Support training, Basic Life Support training, or any other physician approved trainings that deal with the operation of an automated external defibrillator. The Paramedic CU-ERT is not intended for use during actual rescue operations as it can not deliver a defibrillating shock.

Reusable training pads

 Complete training solution : Simulate all the functions and operation of the Paramedic CU-ER1

 Various simulations by remote control 10 training scenarios / CS (Customer Scenario) / Power Off / Pads On & Off / Low BAT / NSR (80/120/240) / VF & VT (180/240) / Asystole

 Compatible with any kinds of mannequins

ECG Monitor (Simulated)

* Patient connection:

Defibrillation Pads, ECG Electrodes

* Bandwidth:

Monitoring Mode: 0.3 to 40 Hz (-3 dB)

AED mode (EMS): 1 Hz to 30 Hz

* ECG size:

Auto-scaled (0.3 to 1 mV signals are displayed with 10mm/mV gain, outside of that range, the peak to peak value is displayed as 10 mm on the LCD display)

* Heart rate:

Digital readout on LCD display, 30 to 300 bpm (± 2%)

Defibrillator (Simulated)

* Operating modes:

Semi automatic

* Waveform:

e-cube biphasic (Truncated exponential type)

* Energy:

* AED mode

150J into a 50 load

* Charging time:

Less than 10 seconds

* Sensitivity & Specificity:

Meets AAMI DF39 guidelines

* Detection Level

> 0.1 mV

* Defibrillation Electrodes:

Multifunction, self-adhesive, adult electrodes (Disposable, Pre-gelled)

Voice & Text Prompts

* Voice & text prompts guide the user through the rescue protocol

* All the user interfaces are supported in local language for easy use and access

Data Storage & Management

* Internal flash memory:

12 hours of event and ECG recording

* SmartMedia Card (32M):

48 hours of event and ECG recording

or 1 hour recording if voice recording is enabled

* Review of the patient’s ECG, incident details and device information

* Data management software for storage, review, and printing of multiple patient rescue data using a PC running on Windows OS.

Display

* Screen Type:

High resolution graphic Liquid Crystal Display

* Screen size:

4 inches (10.16 cm) diagonal, 320X240 pixels

* Sweep speed:

25mm/sec, nominal

* Viewing time:

3.2 seconds

Physical

* Size:

305 mm X 250 mm X 95 mm (L X W X H)

* Weight

Approximately 1.4 kg; without the external battery pack

AC Adapter

* Input:

100 to 240V AC 50/60Hz 1.2A

* Output:

12V DC, 3.5A

External Battery Pack

* 12V LiMnO2 disposable battery pack

* Capacity

when new, 10 hours of continuous operation

External Link

* UART port

* IrDA port

Standard Package

- Device - Remote Control - Defi pads for Training - AC Adapter - Power Cord - Carrying case - User’s Guide