PARAMEDIC CU-ER2 Dual Mode Defibrillator - Automatic & Manual

Paramedic CU-ER2 - this is an easy to use defibrillator with AED and manual modes. In AED mode, it runs in the same way as the Paramedic CU-ER1. In manual mode, the user does the analysis of the victim’s ECG and sets the energy output of the device. The energy output may be set from 2 Joules to 200 Joules. It is intended for use by emergency first responders.

Dual Mode Defibrillator

The Paramedic CU-ER2 is a portable external defibrillator with the following modes:

Automated External Defibrillation (AED) Mode

Manual Mode

In AED Mode, the Paramedic CU-ER2 analyzes the ECG of the patient to determine whether the patient has a shockable or nonshockable ECG rhythm. In this mode, the Paramedic CU-ER2 provides you with voice and text prompts throughout a rescue operation. In Manual Mode, the Paramedic CU-ER2 lets you control the defibrillation process. You assess the ECG of the patient and set the energy of the shock to be delivered. In this mode, the operator has the freedom to set the energy level of the defibrillating shock. The choices are (in Joules) 2, 3, 5, 7, 10, 20, 30, 50, 70, 100, 150, 200. You may also perform synchronous cardioversion for the treatment of atrial fibrillation in this mode. In synchronous cardioversion, the defibrillating shock is delivered within 60 milliseconds of the occurrence of a QRS peak in the patient’s ECG.

ECG monitoring (3 Lead ECG cable)

The Paramedic CU-ER2 may also be used to do ECG monitoring only when it is in Manual mode. ECG monitoring only is done by connecting the custom designed ECG monitoring cable assembly from CU Medical Systems, Inc. No shocks may be delivered when the ECG monitoring cable assembly is connected to the Paramedic CU-ER2.

Intelligent Data Management System

The Paramedic CU-ER2 automatically records ECG and events such as shock deliveries in nonvolatile memory during rescue operations. These data may be printed directly using a portable printer or downloaded to a personal computer for printing and archiving.

Versatile Power Supply

The Paramedic CU-ER2 is powered by an internal rechargeable Nickel Metal Hydride battery pack. It may also be powered by an optional external disposable LiMnO2 battery pack or its AC/DC adapter. While the internal battery is being recharged by the AC/DC adapter, the AC/DC adapter also supplies power to the whole device which enables it to be fully functional.

Automatic and operator initiated Self-Test

The Paramedic CU-ER2 is easy to troubleshoot and maintain. It is programmed to conduct automatic Power On, Run Time, Daily, Weekly, and Monthly self tests. During these tests, the critical subsystems of the device are tested for functionality. If a fault is detected, the device informs you of the fault through audible and visible indicators.

Manual and AED Operation

 Synchronized cardioversion

 Efficient and effective e-cube Biphasic technology (BTE Type)

 ECG monitoring (3 Lead ECG cable)

 CPR coaching

 Lightweight (about 2.8kg) and highly portable

 Versatile power supply

a.Rechargeable battery pack / Disposable battery pack

b.AC/DC adapter

c.Car cigar lighter jack

 Intelligent data management system

a.Internal flash memory : 12 hours of event and ECG recording

b.SmartMedia card (32M) : 42 hours of event and ECG recording or 1 hour voice recording

 External Link : UART port / IrDA port

 Automatic and operator initiated Self-Test (Power on / Run time / Daily / Weekly / Monthly)

Physical

Environmental

Defibrillator

Operating Modes

Manual / Semi automatic

Waveform (Manual and AED Modes)

e-cube biphasic (Truncated exponential type); impedance compensated

Shock Delivery

Via multi-function defibrillator electrode pads

Patient Impedance Range (Manual and AED Modes)

25Ωto 175Ω

Manual Mode

Output Energy (Delivered)

2, 3, 5, 7, 10, 20, 30, 50, 70, 100, 150, 200 Joules

Controls

Power ON/OFF, SHOCK, Mode/Energy Select, CHARGE, DISARM, SYNC, , Plethysmographic wave display ON/OFF, Monitor Alarm Menu, Alarm Silence

Indicators

Electroluminescent back lit Liquid Crystal Display for ECG waveform and Plethysmographic wave, text prompts, Alarm indicators, and Menu Operation Display

Armed Indicators

“Charging complete”text promptContinuous tone on beeperFlashing red backlight of the SHOCK button

Energy Selection

Mode/Energy Selector Knob

Charge Control

ANALYZE/CHARGE Button

Shock Control

SHOCK button

Synchronizer

SYNC message appears on the LCDAudible beep when R-wave is detectedTick mark R-wave marker on the LCD screenShock is delivered within 60 ms of an R-wave occurrence